Ultimaker 3 Extended

[ Might be addition shipping cost Please contact +6628652688 ]

Main featured specs

  • Build volume of 215 x 215 x 300 mm
  • Layer resolution up to 20 micron for 0.4 mm nozzle
  • Print temperature up to 280 ˚C
  • Dual extrusion with a soluble support material
  • Swappable print cores
  • Heated build plate with active leveling

Description

Ultimaker 3 3D Printer Reveal

Ultimaker 3 3D Printer Promo

Ultimaker 3 Features Explained

Ultimaker 3 PVA Filament Explained

Ultimaker 3 3D Printing Timelapse

Ultimaker 3 3D Printer Unboxing

Made By Ultimaker 3 Extended

Printer and Printing Properties

TechnologyFused Filament Fabrication
Print headDual nozzle, with lifting mechanism on 2nd nozzle.
Easily swappable printcores.
Build VolumeLeft nozzle: 215x215x300mm
Right nozzle: 215x215x300mm
Dual material: 197x215x300mm
Filament diameter2.85 mm
Layer resolution0.4mm nozzle: 20 – 200 micron
Step accuracy X, Y, Z12.5, 12.5, 2.5 micron
Print head travel speed30 – 300 mm/s
Material flow speed0.40: up to 16mm³/s
Build plateHeated glass bed
Material typesPLA, PVA, ABS, CPE, Nylon
Nozzle diameter0.4mm
Nozzle temperature180 – 280 ºC
Build plate temperature20 – 100 ºC
Nozzle heat up time< 2 min
Build plate heat up time< 4 min (20 – > 60 ºC)
Average operation noise50 dBA
Nozzle replacementEasily swappable printcores
Filament storageOpen, reel holder incl guide for 2 spools of 750g
NFC system to automatically detect material type
ConnectivityWifi, ethernet, stand alone via USB-drive
Bed levellingActive leveling
CameraYes
Physical dimensions
Printer outer dimensions (incl bowden tube and spoolholder)49,3 x 33,8 x 68,8 cm
Printer outer dimensions (excl bowden tube and spoolholder)35,7 x 33,8 x 48,8 cm
Nett weight11.3 kg
Shipping weight16.2 kg
Shipping box dimensions40,0 x 39,0 x 68,0 cm
Power requirements
Input100 – 240V
4A, 50-60Hz
221 W max.
Output24 V DC, 9.2 A
Ambient conditions
Ambient operating conditions15 – 32 ºC, 10 – 90% RH non condensing
Refer to material specs for optimal operating conditions
Storage conditions printer0 – 32 ºC
Software
Supplied softwareCura 2 – Official Ultimaker Software
Supported OSWindows, Mac, Linux
File typesSTL, OBJ, 3MF
File transferPrint direct from Cura via Network, Stand alone
USB drive printing