Apium M220
Apium Provides a cost-effective solution to manufacture customized implants
The M220 is the world’s first 3D printer designed specifically for the manufacturing of medical products and implants made out of PEEK.
Sterile printing environment
The hot-air filter system analyses the component geometry and adapts the
heating power so that an optimum energy input is always achieved. The air flow enclosing the component is filtered in a practically particlefree circuit.
New extrusion technology
Our extruder was developed regarding flexibility and durability. The four
times higher feed force compared to the previous model enables a
precise material flow. All components in contact with the printing material
are made of medically compatible materials: PEEK, titanium, 316L
steel and PTFE.
Biocompatible filaments
In cooperation with Evonik, materials and filaments were tested for their
biocompatibility and the corresponding tests were successfully
completed. This allows medical devices up to Class III to be manufactured
from PEEK.
Monitored printing process
By integrating a camera system, temperature recording and
servomotors, the printing process is continuously monitored. This enables
the printer to intervene automatically when deviations occur.
Reproducibility
Integrated calibration routines guarantee consistent component quality. The software automatically informs about incoming maintenance operations and guides step-bystep through the procedures.
Documentation & Safty
All important parameters concerning the printing process are automatically
provided in a PDF protocol. The integrated user administration prevents unwanted access. For your data security, we have decided against cloud based solutions.
Integrated software
The control software is specially adapted to our printer hardware and
optimized for processing high-performance polymers. An intuitive user interface allows an easy handling of the printer. You can manage print jobs and check the status of the printer at any time.
Technical support
Our service department will train you in the handling of your printer. We
will be happy to answer any questions you may have about the printer and
other challenges of 3D printing.
Technical Data
Build Size |
130 x 130 x 120 mm |
Printer Size |
850 x 685 x 675 mm |
Nozzle Diameter |
0.2 – 0.8 mm |
Layer Thicknesses |
0.05 – 0.6 mm |
Wall Thickness |
> 250 µm |
Printhead-Temperature |
Up to 540ºC |
Hot Air Filter System |
Up to 280ºC |
Print Bed Material |
Stainless steel 316L |
Noise Emission |
< 70 dB(A) |
Data Formats |
STL, OBJ, G-Code |