Why Choose BioMed Elastic 50A Resin?
Fuel medical innovation using 3D printing and BioMed Elastic 50A Resin, from comfortable, patient-specific medical devices to soft tissue medical models surgeons can reference in the operating room (O.R.)
Comfortable
Produce mass-personalized, medical-grade parts that are comfortable and feel great.
Soft
Produce soft tissue models that feel similar to human tissue and deliver biomechanical behaviors that are ideal for creating full-size hearts, gastrointestinal models, or small complex neurovascular models to bring into the O.R.
Transparent
Parts produced using this material appear transparent and clear to view how tools or objects flow within parts.
Medical-Grade Material, Biocompatible Parts
Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (>30 days), short-term mucosal membrane contact (<24 hours), and USP Class VI certifications.
Applications
Directly 3D print soft, elastic parts requiring biocompatibility with BioMed Elastic 50A Resin. Reduce workflow times by eliminating molding to directly produce comfortable, patient-specific medical devices or soft tissue medical models surgeons can reference in the O.R.
Comfortable medical devices
requiring long-term skin contact
Soft tissue models
including organs, muscle, skin, and small vasculature
Material Properties
Ultimate Tensile Strength : 2.3 MPa
Stress at 50% Elongation : 1 MPa
Stress at 100% Elongation : 1.3 Mpa
Elongation : 150%
Tear Strength : 11 kN/m
Hardness Shore A : 50A
Post-Processing
Washing Process
- Wash for 20 minutes or until clean
- If parts do not appear clean after washing, consider replacing used Isopropyl Alcohol with fresh solvent.
Post Curing Process
- Submerge parts in a transparent, water filled container. Place the container inside the cure unit, and cure for 30 minutes at 70 °C.
- Allow the cure unit to cool down to room temperature between cure cycles.
- Optional: Soaking in water for an additional hour may improve surface feel.