Ultimaker 2+ Nozzle

Description

Ultimaker 2+ nozzle

Improve the print quality of your Ultimaker 2+ 3D printer with this genuine replacement nozzle. 

The Nozzle is needed if the original nozzle becomes damaged or clogged. It can also be used to improve the print quality of your prints.

Nozzle Information

• Nozzle Material: Copper
• Input Diameter: 2.85 – 3.00 mm filament
• Output Diameter: 0.25, 0.4, 0.6, 0.8 mm

Here are some of the benefits of using the Ultimaker 2+ Nozzle:

• Improved print quality: The 0.4mm nozzle size allows for more precise printing, which can lead to improved print quality.
• Reduced print times: The 0.4mm nozzle size allows for more material to be deposited per layer, which can lead to reduced print times.
• Easy to install: It is easy to install. Simply remove the old nozzle and screw in the new one.

Troubleshooting

If you are experiencing problems with your Ultimaker 2+ 3D printer, such as prints not sticking to the bed or prints being of poor quality. Then, you may need to replace the nozzle.

The Ultimaker 2+ Nozzle is a simple and affordable way to improve the performance of your printer.

• Use the correct print settings: When using this nozzle, it is important to use the correct print settings in your slicer software. These settings will vary depending on the material that you are printing with.

• Clean the nozzle regularly: This is a small nozzle, so it is important to clean it regularly. This will help to prevent clogs and ensure that the prints are of the highest quality.

• Store the nozzle properly: When you are not using this Nozzle, it is important to store it properly. This will help to prevent it from becoming damaged.