Build Envelope Capacity: 800 × 800 × 550 mm mm

Maximum Part Weight: 150 kg

Accuracy: Part size < 100 mm: ±0,1 mm; Part size ≥ 100 mm: ±0,15% x L

Accuracy may vary depending onparameters,  part geometry and size, pre-processing or post-processing methods, materialsand environment.

Beam Size: Nominal 0,12 -0,20 mm

Scanning Speed: 15 m/s (Maximum), 6 -10m/s (Typical)

Layer Thickness: 0,07 mm minimum; 0,25 mm maximum

Weight: 2000 kg (with 560 kg initial fill inside)

Machine Size (WxDxH): 1798×1602×2118 mm

Laser: Solid-state frequency tripled Nd: YVO₄

Wavelength: 355 nm

Controller: UnionTech™ RSCON

Part Preparation: Materialise Magics or Polydevs

Operating Systems: Windows 7, Windows 10

Input Data File Format: STL

Network Type and Protocol: Ethernet, IEEE 802.3 using TCP/IP and NFS

Electrical Requirements: 200-240 VAC,50/60 Hz,single phase

Laser Warranty: 5.000 hours or 15 months (whichever comes first)

Base Plate/Recoater Rim: Granite

Systems Control: Closed-loop

Power (nominal): Typically 300 ~500mW (@100kHz) on the target surface of the material under nominal optical path condition

Operating Environment:

Temperature Range: 22–26°C

Maximum Change Rate: 1 °C/hour

Relative Humidity: < 40 % non-condensing

Accessories:

Platform Change Carts: Manual offload cart optional

Processing and Finishing: Post-Curing Unit

System Warranty: One-year warranty (under UnionTech’s Purchase Terms and Conditions)